Seachem AmGuard

Seachem AmGuard safely, rapidly and ef?ciently detoxifies toxic free ammonia. Seachem AmGuard is safe to use during tank cycling and is ideal for treating emergency situations. Seachem AmGuard is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesnt degrade for nearly 72 hours. Thats at least twice as long as our competitors products. Unlike competing products, Seachem AmGuard converts it into a safe, non-toxic form that is readily removed by the tanks biofilter. It does not alter pH. Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12-14. At this pH Seachem AmGuard cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability and Matrix. Seachem AmGuard also removes chlorine and chloramines.

Application Seachem AmGuard
Use 1 capful (5 mL) for every 200 L of aquarium water daily or as needed to reduce ammonia.
ADVANCED: If you have an Ammonia Alert that is reading Alert, then use 1 capful for every 400 L daily. If it reads Alarm, then use 1 capful for every 200 L daily. If it reads Toxic, then use 1 capful for every 80 L daily.
EXPERT: If using the Seachem MultiTest Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*1*100=50 mL.
If water temperature is above 30 °C (86 °F) do not use.